Jingyan Energy

This equipment is used to connect the capacitor products that come out of the curing furnace. The products and trays are cooled to room temperature through air cooling, and the products on the trays are unloaded and transported to a 4 lead capacitor testing machine.

This device is an automatic glue filling device for vehicle mounted capacitors.

Realize automatic vacuum suction of raw materials, automatic stirring, and heating vacuum to remove bubbles (umbrella shaped structure). The stirring tank is composed of a main agent tan and a hardening agent tank. The two raw materials are mixed using static mixing, and after mixing,  it is automatically filled with glue in an atmospheric pressure environment. The glue filling method adopts a single jig with a single point of movement. This device is a glue filling line device.

This equipment is a four lead capacitor automatic inspection and selection device.

It is composed of the product to be tested, the operating carrier, the circular slide rail, the detection mechanism, and the data processing device. The product is automatically fed into the operating carrier of the equipment through a conveyor belt, and then inspected one by one in each function. The detection data can be recorded and traced through an industrial computer, and defective and good products are discharged separately.

This equipment is suitable for capacitor resin hardening devices. The equipment can be divided into feeding area, material handling area, resin hardening area, resin pre-curing area, resin hardening material loading and cooling area, discharge area. The temperature and cycle time in the oven can be set, and can be used as a universal equipment. This device is a glue line device, and the heating time can also be customized according to customer needs.

This equipment is used to connect the capacitor products that come out of the curing oven. The products and trays are cooled to room temperature through air cooling, and the products on the trays are unloaded and transported to a 4 lead capacitor testing machine.

This equipment is a capacitor automatic inspection and selection device.

It consists of a structure for handling products to be tested, an inspection mechanism, and a data 

processing device. The product is manually mounted on the fixture, moved along with the work 

station, passed through the inspection mechanism of each work station, and inspected in sequence.

The product is judged to be good or bad according to the set contents of the inspection. The alarm is 

generated when the defective product is moved to the defective product exit station, and after the  

defective product is removed manually, the alarm is reset and the inspection continues to run.

Each inspection station can perform manual inspection independently.

The qualified products will be manually discharged at the qualified product discharging station.