Jingyan Energy

Suitable for metallized film capacitor element spraying, it can be sprayed with zinc, zinc tin alloy, or zinc aluminum alloy. The supplied material is a manually stacked spraying jig, which is manually placed on the loading platform and automatically hooked. The unloading and loading position are in the same place and manually picked up, reducing personnel movement to improve efficiency. The spraying adopts a 4+4 method, and the material utilization rate of the spraying is more than 10% higher than other types of spraying machines.

This equipment is suitable for cleaning the arc surface of metallized film capacitor elements after spraying. The element is cleaned by spraying with glass sand and striking the arc surface of the element.

The discarded spray dust and glass sand that have been shot down are automatically de-dusted, separated, and recleaned through the cyclone separation device and dust removal equipment in the chamber; It is gentler than the traditional roller type and effectively protects the spray layer from impact. The equipment is manually loaded and discharged to a separate receiving tray, or the receiving method can be customized according to customer requirements.

This equipment is used for metallized film capacitor element clearing and sorting, the elements are supplied to the testing fixture of the host machine through the element feeding mechanism, and the elements clamped on the fixture move grid by grid  and are electrically connected to the configuration of each test department to complete each inspection item. Through the inspection to determine whether the element is good or not, the defective products are classified and discharged, and the qualified products are sorted out by the transfer mechanism to the element unloading belt. The equipment needs to be manually arranged to the special rubber frame for loading and unloading, and the loading and unloading method can be customized according to the customer's demand.

This equipment is a four lead capacitor automatic inspection and selection device.

It is composed of the product to be tested, the operating carrier, the circular slide rail, the detection mechanism, and the data processing device. The product is automatically fed into the operating carrier of the equipment through a conveyor belt, and then inspected one by one in each function. The detection data can be recorded and traced through an industrial computer, and defective and good products are discharged separately.

This equipment is a capacitor automatic inspection and selection device.

It consists of a structure for handling products to be tested, an inspection mechanism, and a data 

processing device. The product is manually mounted on the fixture, moved along with the work 

station, passed through the inspection mechanism of each work station, and inspected in sequence.

The product is judged to be good or bad according to the set contents of the inspection. The alarm is 

generated when the defective product is moved to the defective product exit station, and after the  

defective product is removed manually, the alarm is reset and the inspection continues to run.

Each inspection station can perform manual inspection independently.

The qualified products will be manually discharged at the qualified product discharging station.