Jingyan Energy

This equipment is a capacitor automatic inspection and selection device.

It consists of a structure for handling products to be tested, an inspection mechanism, and a data 

processing device. The product is manually mounted on the fixture, moved along with the work 

station, passed through the inspection mechanism of each work station, and inspected in sequence.

The product is judged to be good or bad according to the set contents of the inspection. The alarm is 

generated when the defective product is moved to the defective product exit station, and after the  

defective product is removed manually, the alarm is reset and the inspection continues to run.

Each inspection station can perform manual inspection independently.

The qualified products will be manually discharged at the qualified product discharging station.

This equipment is suitable for capacitor resin hardening devices. The equipment can be divided into feeding area, material handling area, resin hardening area, resin pre-curing area, resin hardening material loading and cooling area, discharge area. The temperature and cycle time in the oven can be set, and can be used as a universal equipment. This device is a glue line device, and the heating time can also be customized according to customer needs.

A specialized equipment for welding capacitor elements, which achieves automatic feeding, positioning, welding, flipping, welding, and jig reflow through jigs, cylinders, belts, etc. Suitable for automated assembly lines. The equipment needs to be manually installed with welding fixtures to the loading station, and the welding is completed with manual unloading.

This equipment is suitable for cleaning the arc surface of metallized film capacitor elements after spraying. The element is cleaned by spraying with glass sand and striking the arc surface of the element.

The discarded spray dust and glass sand that have been shot down are automatically de-dusted, separated, and recleaned through the cyclone separation device and dust removal equipment in the chamber; It is gentler than the traditional roller type and effectively protects the spray layer from impact. The equipment is manually loaded and discharged to a separate receiving tray, or the receiving method can be customized according to customer requirements.

This equipment is used to connect the capacitor products that come out of the curing furnace. The products and trays are cooled to room temperature through air cooling, and the products on the trays are unloaded and transported to a 4 lead capacitor testing machine.

This device is an automatic glue filling device for vehicle mounted capacitors.

Realize automatic vacuum suction of raw materials, automatic stirring, and heating vacuum to remove bubbles (umbrella shaped structure). The stirring tank is composed of a main agent tan and a hardening agent tank. The two raw materials are mixed using static mixing, and after mixing,  it is automatically filled with glue in an atmospheric pressure environment. The glue filling method adopts a single jig with a single point of movement. This device is a glue filling line device.

This equipment is used to connect the capacitor products that come out of the curing oven. The products and trays are cooled to room temperature through air cooling, and the products on the trays are unloaded and transported to a 4 lead capacitor testing machine.

This device is a 4 lead capacitor automatic shaping and gluing device.

Realize automatic vacuum suction of raw materials, automatic stirring, and heating vacuum to remove bubbles (umbrella shaped structure). The stirring tank is composed of a main agent tan and a hardening agent tank. The two raw materials are mixed using static mixing, and after mixing,  it is automatically filled with glue in an atmospheric pressure environment. The glue filling method adopts a single jig with a single point of movement. This device is a glue filling line device.

It is used for preheating in-case capacitors before glue injection of capacitors. The electric heating tube is the heat source, the blower realizes the internal circulation of the hot air, and realizes automatic feeding and discharging through jigs, cylinders, chains, etc. This equipment is a glue line equipment, and the heating time can also be customized according to customer needs.

It is used for curing in-case capacitors and glue after glue injection of four lead capacitors. The electric heating tube is the heat source, the blower realizes the internal circulation of the hot air, and realizes automatic feeding and discharging through jigs, cylinders, chains, etc. This equipment is a glue line equipment, and the heating time can also be customized according to customer needs.

The device is an automatic capacitor filling device.

Realize automatic vacuum suction of raw materials, automatic stirring, and heating vacuum to remove bubbles (umbrella shaped structure). The stirring tank is composed of a main agent tank and a hardening agent tank. The two raw materials are mixed using static mixing, and after mixing, it is automatically filled with glue under vacuum environment, and the filling method adopts single fixture and multi-point fixed-point filling. This device is a glue line connection device.

It is used for curing in-case capacitors before glue injection of vehicle mounted capacitors. The electric heating tube is the heat source, the blower realizes the internal circulation of the hot air, and realizes automatic feeding and discharging through jigs, cylinders, chains, etc. This equipment is a glue line equipment, and the heating time can also be customized according to customer needs.